Identificador persistente para citar o vincular este elemento:
http://hdl.handle.net/10662/21329
Títulos: | Processing of ZrB2 tribo-ceramics by reactive spark plasma sintering of ZrH2+2B subjected to high-energy pre-ball-milling |
Autores/as: | López Arenal, Jesús Moshtaghioum, Bibi Malmal Gómez García, Diego Ortiz, Ángel Luis |
Palabras clave: | ZrB2;Sinterización por plasma de chispa reactiva;Molienda de bolas de alta energía;Tribo-cerámica;Desgaste por deslizamiento;Reactive spark plasma sintering;High-energy ball-milling;Tribo-ceramics;Sliding wear |
Fecha de publicación: | 2023 |
Editor/a: | Elsevier |
Resumen: | The reactive spark plasma sintering (RSPS) of monolithic ZrB2 ceramics from ZrH2+2B powder mixtures subjected to shaker pre-milling was investigated, and compared with other three sintering approaches. It was found that RSPS is optimal at 1850 °C, which results in fully-dense ZrB2 ceramics with ∼20 GPa hardness. Comparatively, at 1850 °C RSPS from the simply-mixed ZrH2+2B powder mixture, SPS from the commercial ZrB2 powder, and SPS from the shaker-milled ZrB2 powder result in non-dense (76.7–86.7%) and softer (6.0–11.8 GPa) ZrB2 ceramics. Furthermore, the optimally RSPS-ed ZrB2 ceramic was subjected to unlubricated sliding-wear tests against diamond under 40 N load for 1000 m of sliding, demonstrating that it is a promising tribo-ceramic that only undergoes mild tribo-oxidative wear at 10–8 mm3/(N·m) in the form of a slight plasticity-dominated two-body abrasion with eventual formation and partial loss of a self-lubricating and protective oxide tribolayer. |
URI: | http://hdl.handle.net/10662/21329 |
ISSN: | 0955-2219 |
DOI: | j.jeurceramsoc.2023.04.047 |
Colección: | DIMEM - Artículos |
Archivos
Archivo | Descripción | Tamaño | Formato | |
---|---|---|---|---|
j_jeurceramsoc_2023_04_047.pdf | 6,68 MB | Adobe PDF | Descargar |
Este elemento está sujeto a una licencia Licencia Creative Commons