Please use this identifier to cite or link to this item: http://hdl.handle.net/10662/8724
Full metadata record
DC FieldValueLanguage
dc.contributor.authorCalderón Godoy, Antonio José-
dc.contributor.authorGonzález Pérez, Isaías-
dc.contributor.authorCalderón Godoy, Manuel-
dc.contributor.authorSegura Manzano, Francisca-
dc.contributor.authorAndújar Márquez, José Manuel-
dc.date.accessioned2019-02-12T13:02:22Z-
dc.date.available2019-02-12T13:02:22Z-
dc.date.issued2016-
dc.identifier.issn1424-8220-
dc.identifier.urihttp://hdl.handle.net/10662/8724-
dc.description.abstractIn this work a new, scalable and low cost multi-channel monitoring system for Polymer Electrolyte Fuel Cells (PEFCs) has been designed, constructed and experimentally validated. This developed monitoring system performs non-intrusive voltage measurement of each individual cell of a PEFC stack and it is scalable, in the sense that it is capable to carry out measurements in stacks from 1 to 120 cells (from watts to kilowatts). The developed system comprises two main subsystems: hardware devoted to data acquisition (DAQ) and software devoted to real-time monitoring. The DAQ subsystem is based on the low-cost open-source platform Arduino and the real-time monitoring subsystem has been developed using the high-level graphical language NI LabVIEW. Such integration can be considered a novelty in scientific literature for PEFC monitoring systems. An original amplifying and multiplexing board has been designed to increase the Arduino input port availability. Data storage and real-time monitoring have been performed with an easy-to-use interface. Graphical and numerical visualization allows a continuous tracking of cell voltage. Scalability, flexibility, easy-to-use, versatility and low cost are the main features of the proposed approach. The system is described and experimental results are presented. These results demonstrate its suitability to monitor the voltage in a PEFC at cell level.es_ES
dc.description.sponsorshipMinisterio de Economía y Competitividad: Proyecto DPI2013-43870es_ES
dc.format.extent19 p.es_ES
dc.language.isoenges_ES
dc.publisherMDPIes_ES
dc.rightsAtribución-NoComercial-SinDerivadas 3.0 España*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/es/*
dc.subjectAdquisición de datoses_ES
dc.subjectMotorización en tiempo reales_ES
dc.subjectCelda de combustiblees_ES
dc.subjectTensión de celdaes_ES
dc.subjectLabVIEWes_ES
dc.subjectArduinoes_ES
dc.subjectData acquisitiones_ES
dc.subjectReal-time monitoringes_ES
dc.subjectFuel celles_ES
dc.subjectCell voltagees_ES
dc.titleA new, scalable and low cost multi-channel monitoring system for polymer electrolyte fuel cellses_ES
dc.typearticlees_ES
dc.description.versionpeerReviewedes_ES
dc.rights.accessRightsopenAccesses_ES
dc.subject.unesco1209.03 Análisis de Datoses_ES
dc.subject.unesco3304.13 Dispositivos de Transmisión de Datoses_ES
dc.identifier.bibliographicCitationCalderón Godoy, J. A.; González Pérez, I.; Calderón Godoy, M.; Segura Manzano,F. y Andújar Márquez, J. M. (2016). A new, scalable and low cost multi-channel monitoring system for polymer electrolyte fuel cells. Sensors, 16, 3, 349. ESSN 1424-8220es_ES
dc.type.versionpublishedVersiones_ES
dc.contributor.affiliationUniversidad de Extremadura. Departamento de Ingeniería Eléctrica, Electrónica y Automáticaes_ES
dc.contributor.affiliationUniversidad de Huelvaes_ES
dc.relation.publisherversionhttp://www.mdpi.com/1424-8220/16/3/349es_ES
dc.relation.publisherversionhttps://doi.org/10.3390/s16030349es_ES
dc.identifier.doi10.3390/s16030349-
dc.identifier.publicationtitleSensorses_ES
dc.identifier.publicationissue3es_ES
dc.identifier.publicationfirstpage1es_ES
dc.identifier.publicationlastpage19es_ES
dc.identifier.publicationvolume16, 349es_ES
Appears in Collections:DIEEA - Artículos

Files in This Item:
File Description SizeFormat 
s16030349.pdf4,25 MBAdobe PDFView/Open


This item is licensed under a Creative Commons License Creative Commons