Please use this identifier to cite or link to this item:
http://hdl.handle.net/10662/19697
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Carrasco Amador, Juan Pablo | - |
dc.contributor.author | Díaz Díez, María Ángeles | - |
dc.contributor.author | Sánchez González, José (físico) | - |
dc.contributor.author | Díaz Parralejo, Antonio | - |
dc.contributor.author | Ortiz, Ángel Luis | - |
dc.date.accessioned | 2024-02-02T08:10:13Z | - |
dc.date.available | 2024-02-02T08:10:13Z | - |
dc.date.issued | 2020 | - |
dc.identifier.issn | 0272-8842 | - |
dc.identifier.uri | http://hdl.handle.net/10662/19697 | - |
dc.description.abstract | A study was made of the influence of the substrate (fused quartz, sapphire, soda-lime glass, and stainless steel AISI-310) and sintering temperature (300 °C, 500 °C, and 800 °C) on the thickness and number of layers of 3YSZ multilayer sol-gel coatings that can be deposited by dip-coating without the coating cracking. It was found that the thickness and the number of layers increase with the higher sintering temperature and the greater substrate's thermal expansion coefficient. These trends were explained as resulting from the residual in-plane stresses generated in the sol-gel coating when cooled from the sintering temperature down to room temperature due to its thermal expansion coefficient differing from that of the substrate. Thus, the smaller the residual in-plane tensile stress or the greater the residual in-plane compressive stress, the greater can be the thickness and number of layers of the sol-gel coating. The same is the case for higher sintering temperatures because the densification of the layers either predominates over the increased in-plane tensile stresses or combines synergistically with the greater in-plane compressive stresses. | es_ES |
dc.description.sponsorship | This work was supported by the Junta de Extremadura and FEDER Funds under the grant number GR18164. | - |
dc.format.extent | 5 p. | es_ES |
dc.format.mimetype | application/pdf | en_US |
dc.language.iso | eng | es_ES |
dc.publisher | Elsevier | es_ES |
dc.subject | Sol-gel | es_ES |
dc.subject | Dip-coating | es_ES |
dc.subject | Zirconia | es_ES |
dc.subject | Thin films/coatings | es_ES |
dc.subject | Sintering temperature | es_ES |
dc.subject | Recubrimiento por inmersión | es_ES |
dc.subject | Circona | - |
dc.subject | Películas finas/recubrimientos | - |
dc.subject | Temperatura de sinterizado | - |
dc.title | Influence of substrate and sintering temperature on the thickness and number of layers of 3YSZ multilayer sol-gel coatings | es_ES |
dc.type | article | es_ES |
dc.description.version | peerReviewed | es_ES |
europeana.type | TEXT | en_US |
dc.rights.accessRights | closedAcces | es_ES |
dc.subject.unesco | 3312 Tecnología de Materiales | - |
dc.subject.unesco | 3312.03 Materiales Cerámicos | - |
europeana.dataProvider | Universidad de Extremadura. España | es_ES |
dc.identifier.bibliographicCitation | Juan P. Carrasco-Amador, María A. Díaz-Díez, José Sánchez-González, Antonio Díaz-Parralejo, Angel L. Ortiz, Influence of substrate and sintering temperature on the thickness and number of layers of 3YSZ multilayer sol-gel coatings, Ceramics International, Volume 46, Issue 11, Part A, 2020, Pages 18347-18351, ISSN 0272-8842, https://doi.org/10.1016/j.ceramint.2020.04.028. | es_ES |
dc.type.version | PublishedVersion | es_ES |
dc.contributor.affiliation | Universidad de Extremadura. Departamento de Expresión Gráfica | es_ES |
dc.contributor.affiliation | Universidad de Extremadura. Departamento de Ingeniería Mecánica, Energética y de los Materiales | - |
dc.relation.publisherversion | https://doi.org/10.1016/j.ceramint.2020.04.028 | es_ES |
dc.identifier.doi | 10.1016/j.ceramint.2020.04.028 | - |
dc.identifier.publicationtitle | Ceramics International | es_ES |
dc.identifier.publicationissue | 11 | - |
dc.identifier.publicationfirstpage | 18347 | - |
dc.identifier.publicationlastpage | 18351 | - |
dc.identifier.publicationvolume | 46 | es_ES |
dc.identifier.orcid | 0000-0002-5177-3623 | es_ES |
dc.identifier.orcid | 0000-0002-3291-518X | - |
dc.identifier.orcid | 0000-0002-0176-6759 | - |
dc.identifier.orcid | 0000-0002-5125-3687 | - |
Appears in Collections: | DEXGR - Artículos DIMEM - Artículos |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
j_ceramint_2020_04_028.pdf ???org.dspace.app.webui.jsptag.ItemTag.accessRestricted??? | 814,38 kB | Adobe PDF | View/Open Request a copy |
This item is licensed under a Creative Commons License